Wheel brushes crimped, universal, shank-mounted

POS wheel brush crimped RBU dia. 50x15 mm shank dia. 6.35 mm steel wire dia. 0.30 universal

POS RBU 5015/6,35 ST 0,30 Universal

Item number:: 43740004
EAN:: 4007220398081

POS wheel brush crimped RBU dia. 50x15 mm shank dia. 6.35 mm steel wire dia. 0.30 universal 1

POS wheel brush crimped RBU dia. 50x15 mm shank dia. 6.35 mm steel wire dia. 0.30 universal 2

POS wheel brush crimped RBU dia. 50x15 mm shank dia. 6.35 mm steel wire dia. 0.30 universal 3

Technical data

Distributor Search

Technical information

POS wheel brush crimped RBU dia. 50x15 mm shank dia. 6.35 mm steel wire dia. 0.30 universal

Dia. external: 50 mm
Dia. filament material: 0.3 mm
Dia. shank: 6.35 mm
Filament material: Steel wire (ST)
Length, filament: 12.5 mm
Max. RPM: 20000 RPM
Mounting system: Shank
Packaging: POS packaging
RPM, optimum: 10.000 - 15.000 RPM
Width: 15 mm
Packaging unit: 1 piece

Description

Generally suitable for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring. PFERD TOOLS special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Advantages

Highly flexible, enabling optimal adjustment to the workpiece contour.
Optimum presentation on the PFERD TOOLS CENTER using hanging hole and labelling with EAN number, designation and filament material.
Long tool life through use of PFERD TOOLS special wire.

Recommendations for use

Please observe the recommended rotational speeds.
For the best results, use a tool drive with a minimum output of 300 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Materials that can be worked: Cast iron; Cast steel; Elastomers; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Thermosetting plastics; Wood

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing oxide layers; Roughening

Drive types: Flexible shaft drive; Power drill; Straight grinder

Downloads

Wheel brushes crimped, universal, shank-mounted

POS wheel brush crimped RBU dia. 50x15 mm shank dia. 6.35 mm steel wire dia. 0.30 universal

POS RBU 5015/6,35 ST 0,30 Universal

PFERD TOOLS Newsletter subscription