Wheel brushes crimped POLISCRATCH, with thread

POLISCRATCH wheel brush crimped RBU dia. 100x20mm M14 steel wire dia. 0.60 angle grinders

Item number:: 43502102
EAN:: 4007220892459

POLISCRATCH wheel brush crimped RBU dia. 100x20mm M14 steel wire dia. 0.60 angle grinders 2

POLISCRATCH wheel brush crimped RBU dia. 100x20mm M14 steel wire dia. 0.60 angle grinders 3

POLISCRATCH wheel brush crimped RBU dia. 100x20mm M14 steel wire dia. 0.60 angle grinders 4

Technical data

Distributor Search

Matching accessories & spare parts

Arbor for POLISCRATCH brush BO 8/M14

Technical information

POLISCRATCH wheel brush crimped RBU dia. 100x20mm M14 steel wire dia. 0.60 angle grinders

Dia. external: 100 mm
Dia. filament material: 0.6 mm
Dia. thread: M14x2
Filament material: Steel wire (ST)
Length, filament: 18 mm
Max. RPM: 6000 RPM
Mounting system: Thread
Packaging: POS packaging
RPM, optimum, from: 1200 RPM
RPM, optimum, to: 3500 RPM
Width: 20 mm
Packaging unit: 1 piece

Description

Excellent for processing and removing soft materials such as underseal and anti-drumming compound. Most suitable for achieving rough surfaces with a sandblasted appearance due to the specific geometry of the filament material.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Steel wire withstands temperatures up to 300 Â°C.

Advantages

High cooling effect and no smearing or loading of the brush due to the open construction of the filament material.
Longer tool life as the brush can be resharpened using a sharpening block.
Long tool life through use of PFERD special wire.

Recommendations for use

Please observe the recommended rotational speeds.
Use only on speed-adjustable angle and straight grinders.
Can be resharpened up to 10x. To do so, press the wire tips onto a sharpening block for around 2–3 seconds. Change the running direction to sharpen the tool.

Materials that can be worked: Cast iron; Cast steel; Elastomers; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Wood

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing oxide layers; Roughening

Drive types: Angle grinder; Cordless angle grinder; Drive spindle; Flexible shaft drive; Straight grinder

PFERDVALUE

PFERDERGONOMICS

recommends the POLISCRATCH design to sustainably reduce the vibration produced during use and to improve comfort when working.

Downloads

Wheel brushes crimped POLISCRATCH, with thread

POLISCRATCH wheel brush crimped RBU dia. 100x20mm M14 steel wire dia. 0.60 angle grinders

Matching accessories & spare parts

PFERDERGONOMICS

PFERD Newsletter subscription