Wheel brushes crimped, encapsulated shank-mounted

encapsulated wheel brush crimped RBV dia. 63x7 mm shank dia. 6 mm steel wire dia. 0.30

Item number:: 43507501
EAN:: 4007220220955

encapsulated wheel brush crimped RBV dia. 63x7 mm shank dia. 6 mm steel wire dia. 0.30 2

Technical data

Distributor Search

Technical information

encapsulated wheel brush crimped RBV dia. 63x7 mm shank dia. 6 mm steel wire dia. 0.30

Dia. external: 63 mm
Dia. filament material: 0.3 mm
Dia. shank: 6 mm
Filament material: Steel wire (ST)
Length, filament: 20 mm
Length, total: 1-9/16
Length, total: 40 mm
Max. RPM: 15000 RPM
Mounting system: Shank
RPM, optimum, from: 7500 RPM
RPM, optimum, to: 11300 RPM
Width: 7 mm
Packaging unit: 1 piece

Description

Particularly aggressive brushing effect for heavy-duty brushing.

With plastic-bonded brushes, the filament material is bonded in an elastic plastic mass. In comparison to non-plastic-bonded brushes, the brushing effect is considerably more aggressive with limited flexibility.

Brushes with encapsulated steel wire are available in different versions. The hardness determines the applicable brushing effect.

For general use. Aggressive enough for most applications.

The filament material of this brush is a brass-plated steel wire. Colour: green

Advantages

Focused working thanks to high dimensional stability.
Maximum tool life as premature wire breakage is prevented.

Recommendations for use

Please observe the recommended rotational speeds.
For the best results, use a tool drive with a minimum output of 300 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Materials that can be worked: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)

Applications: Cleaning; Deburring; Derusting; Descaling; Paint stripping; Removing oxide layers; Root seam processing; Work on fillet welds; Work on weld seams

Drive types: Flexible shaft drive; Power drill; Straight grinder

Downloads

Wheel brushes crimped, encapsulated shank-mounted

encapsulated wheel brush crimped RBV dia. 63x7 mm shank dia. 6 mm steel wire dia. 0.30

PFERD Newsletter subscription