Universal solid carbide end mill with five flutes UCD5, radius corner design with chip dividers, 2xD – metric

Solid carbide end mill dia. 12 mm, 5 flutes, with chip divider, 2xDC, radius 0.5 mm, AlCrN coating, HB shank, Universal

SCM-UCD5-M120R05-M83HB AP40

Item number:: 23000855
EAN:: 4007220763612

Solid carbide end mill dia. 12 mm, 5 flutes, with chip divider, 2xDC, radius 0.5 mm, AlCrN coating, HB shank, Universal 1

Solid carbide end mill dia. 12 mm, 5 flutes, with chip divider, 2xDC, radius 0.5 mm, AlCrN coating, HB shank, Universal Youtube

Technical data Change variant

Distributor Search

Technical information

Solid carbide end mill dia. 12 mm, 5 flutes, with chip divider, 2xDC, radius 0.5 mm, AlCrN coating, HB shank, Universal

Chip divider IEP: yes
Coating: AlCrN
Corner radius RE: 0.5 mm
Corner type: Radius corner design
Cutting diameter DC: 12 mm
Cutting edge count ZEFP: 5 pcs.
Cutting material: AP40
Depth of cut maximum APMX: 26 mm
Feed direction: x,y,z
Functional length LF: 83 mm
Helix angles: 38°
Internal coolant: no
Length, working LU: 36 mm
Neck diameter DN: 11.6 mm
Norm: DIN 6527 Long
Shank diameter DCON: 12 mm
Shank type: HB (DIN6535)
Tolerance for shank diameter TCDCON: h5
Version: 90° with radius and chip divider
Packaging unit: 1 piece

Cutting Data Calculator

The perfect cutting data is a crucial success factor for productivity in your milling and boring processes. Our cutting data calculator's intuitive user interface allows you to quickly and easily calculate the required processing parameters for your use case and the material to be processed.

Unit of measurement

Machining

Material

Radial depth of cut (a_e)

Axial depth of cut (a_p)

Results

Description

The solid carbide end mills are suitable for universal use on a variety of materials.

Mills with chip divider for dynamic machining and trochoidal milling.

Weldon shank HB in accordance with DIN 6535 with lateral driving surface.

Special features

Universal use on the most important materials.
High productivity due to optimum stock removal rate.
State-of-the-art coatings.
Optimum chip control thanks to chip divider.
Unequal pitch for low-vibration machining with smooth running.
Design with neck chip channel.

Recommendations for use

Observe the recommended cutting data.
Ensure stable workpiece and tool clamping to achieve best performance.

Materials that can be worked: Aluminium; Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Copper; Ductile cast iron; Ferrite (magnetic material); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Roller-bearing and ball-bearing steels; Soft aluminium alloys; Soft non-ferrous metal; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Titanium; Titanium alloys; Tool steels; Tough aluminium alloys