Tungsten carbide burrs for high performance, EDGE, conical counterbore shape KSJ EDGE,

Tungsten carbide burr EDGE conical counterbore KSJ 30 ° dia. 16x05 mm shank dia. 6 mm work on edges

KSJ 1605/6 EDGE 30°

Item number:: 21115366
EAN:: 4007220952443

Tungsten carbide burr EDGE conical counterbore KSJ 30 ° dia. 16x05 mm shank dia. 6 mm work on edges 1

Tungsten carbide burr EDGE conical counterbore KSJ 30 ° dia. 16x05 mm shank dia. 6 mm work on edges 2

Tungsten carbide burr EDGE conical counterbore KSJ 30 ° dia. 16x05 mm shank dia. 6 mm work on edges 3

Tungsten carbide burr EDGE conical counterbore KSJ 30 ° dia. 16x05 mm shank dia. 6 mm work on edges Youtube

Technical data

Distributor Search

Technical information

Tungsten carbide burr EDGE conical counterbore KSJ 30 ° dia. 16x05 mm shank dia. 6 mm work on edges

Angle: 60 °
Cut: EDGE
Dia. ball bearing: 10 mm
Dia. external: 16 mm
Dia. shank: 6 mm
Length, construction: 14 mm
Length, cut: 5 mm
Length, total: 54 mm
RPM, grey cast iron, white cast iron: 12000 - 18000 RPM
RPM, hard non-ferrous metals: 5000 - 7000 RPM
RPM, hardened, heat-treated steels over 1,200 N/mm²: 12000 - 15000 RPM
RPM, high-temperature-resistant materials: 5000 - 9000 RPM
RPM, soft non-ferrous metals: 12000 - 18000 RPM
RPM, steels up to 1,200 N/mm²: 12000 - 18000 RPM
Packaging unit: 1 piece

Description

Tungsten carbide burrs with the EDGE cut have been especially developed for defined work on edges. The special design allows the burr to run directly along the edges without damaging the workpiece. In just one step, it is possible to achieve precise edge shapes. Among other things, rounding edges is a precautionary measure for anti-corrosion protection according to: ISO 129443, ISO 85013, SOLAS XII/6.3 (Ref. T4/3.01 MSC.1/Circ.1198).

Conical counterbore burr for the production of precisely defined chamfers. Suitable for counterboring and chamfering of defined 30° chamfer angles.

Special features

Special design for precise guidance.
Safe and comfortable to guide.
Creates exact edge shapes in one single step.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

Use the burrs counterrotationally. In order to produce a fine surface, finally pass them over the edges in the direction of rotation.
If possible, use burrs with the EDGE cut with the PFERD TOOLS compressed-air straight grinder PG 3/210 with the matching guide sleeve EFH PG 3/210.
If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; Nickel-based alloys (e.g. Inconell and Hastelloy); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW); Zinc

Applications: Chamfering; Countersinking; Deburring; Milling; Working on edges; Working on edges (chamfering, rounding)

Drive types: Automated centres; Straight grinder; Tool machine

PFERD TOOLS VALUE

PFERD TOOLS EFFICIENCY

recommends burrs with the EDGE cut for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.

Downloads

Tungsten carbide burrs for high performance, EDGE, conical counterbore shape KSJ EDGE,

Tungsten carbide burr EDGE conical counterbore KSJ 30 ° dia. 16x05 mm shank dia. 6 mm work on edges

KSJ 1605/6 EDGE 30°

PFERD TOOLS EFFICIENCY

PFERD TOOLS Newsletter subscription