Tungsten carbide burrs for high performance, EDGE, concave radius burrs V EDGE,

Tungsten carbide concave radius burr EDGE V ECS dia. 16x12 mm shank dia. 6 mm work on edges

Item number:: 21152946
EAN:: 4007220098028

Tungsten carbide concave radius burr EDGE V ECS dia. 16x12 mm shank dia. 6 mm work on edges 2

Tungsten carbide concave radius burr EDGE V ECS dia. 16x12 mm shank dia. 6 mm work on edges 3

Tungsten carbide concave radius burr EDGE V ECS dia. 16x12 mm shank dia. 6 mm work on edges Youtube

Technical data Change variant

Distributor Search

Choose options

Dia. external

16 mm

Length, construction

12 mm 24 mm

Reset Filter

Technical information

Tungsten carbide concave radius burr EDGE V ECS dia. 16x12 mm shank dia. 6 mm work on edges

Cut: EDGE
Dia. ball bearing: 10 mm
Dia. external: 16 mm
Dia. shank: 6 mm
Dia. sleeve: 25 mm
Length, construction: 24 mm
Length, cut: 3 mm
Length, total: 2-3/64
Length, total: 52 mm
PFERD type: V 1612/6 EDGE R3,0 ECS
RPM from, grey cast iron, white cast iron: 12000 RPM
RPM from, hard non-ferrous metals: 5000 RPM
RPM from, hardened, heat-treated steels over 1,200 N/mm²: 12000 RPM
RPM from, high-temperature-resistant materials: 5000 RPM
RPM from, soft non-ferrous metals: 12000 RPM
RPM from, steels up to 1,200 N/mm²: 12000 RPM
RPM to, grey cast iron, white cast iron: 18000 RPM
RPM to, hard non-ferrous metals: 7000 RPM
RPM to, hardened, heat-treated steels over 1,200 N/mm²: 15000 RPM
RPM to, high-temperature-resistant materials: 9000 RPM
RPM to, soft non-ferrous metals: 18000 RPM
RPM to, steels up to 1,200 N/mm²: 18000 RPM
Radius corner design: 3 mm
Packaging unit: 1 piece

Description

Tungsten carbide burrs with the EDGE cut have been especially developed for defined work on edges. The special design allows the burr to run directly along the edges without damaging the workpiece. In just one step, it is possible to achieve precise edge shapes. Among other things, rounding edges is a precautionary measure for anti-corrosion protection according to: ISO 129443, ISO 85013, SOLAS XII/6.3 (Ref. T4/3.01 MSC.1/Circ.1198).

Concave radius burrs for the production of precise radii. Suitable for the production and processing of 3 mm outer radii.

The EDGE Cutting System consists of burrs with the EDGE cut and a special guide sleeve that can be used on any commercially available drive to ensure optimal guidance during light deburring work.

Advantages

Special design for precise guidance.
Safe and comfortable to guide.
Creates exact edge shapes in one single step.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
Improved guidance.
Can be used with any conventional straight grinder.
Burr is interchangeable.

Recommendations for use

Use the burrs counterÂrotationally. In order to produce a fine surface, finally pass them over the edges in the direction of rotation.
If possible, use burrs with the EDGE cut with the PFERD compressed-air straight grinder PG 3/210 with the matching guide sleeve EFH PG 3/210.
If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.

Ordering notes

The EDGE Cutting System (ECS) burr can be reordered and replaced if required. Matching burr: Matching burr: V 1612/6 EDGE R3,0.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Copper; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW); Zinc

Applications: Chamfering; Deburring; Milling; Rounding; Working on edges; Working on edges (chamfering, rounding)

Drive types: Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERDVALUE

PFERDEFFICIENCY

recommends burrs with the EDGE cut for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.

Downloads

Tungsten carbide burrs for high performance, EDGE, concave radius burrs V EDGE,

Tungsten carbide concave radius burr EDGE V ECS dia. 16x12 mm shank dia. 6 mm work on edges

PFERDEFFICIENCY

PFERD Newsletter subscription