Tungsten carbide burrs for high performance, ALU HC-NFE, cylindrical shape with radius end WRC

TC high-performance burr ALU cylindrical with radius end WRC dia. 06x16 mm shank dia. 6 mm HICOAT coated for aluminium/non-ferrous metals

WRC 0616/6 ALU HC-NFE

Item number:: 21105787
EAN:: 4007220783849

New

TC high-performance burr ALU cylindrical with radius end WRC dia. 06x16 mm shank dia. 6 mm HICOAT coated for aluminium/non-ferrous metals 1

Technical data

Distributor Search

Technical information

TC high-performance burr ALU cylindrical with radius end WRC dia. 06x16 mm shank dia. 6 mm HICOAT coated for aluminium/non-ferrous metals

Cut: ALU HC-NFE
Dia. external: 6 mm
Dia. shank: 6 mm
Length, cut: 16 mm
Length, total: 55 mm
RPM, hard non-ferrous metals: 32000 - 70000 RPM
RPM, soft non-ferrous metals: 32000 - 70000 RPM
RPM, thermoplastics, fibre-reinforced plastics (GRP/CRP): 32000 - 70000 RPM
Packaging unit: 1 piece

Description

The use of burrs with the PFERD TOOLS HICOAT coating HC-NFE prevents chips adhering during work on soft aluminium alloys. This increases the tool life and improves the surface quality of the workpiece.

Cylindrical burr with radius end according to DIN 8032. Combination of cylindrical and ball-shaped geometries.

Special features

Mainly used for long-chipping and lubricating non-ferrous metals.
Maximum stock removal rate.
Effective chip removal through improved anti-adhesion characteristics.
Lower thermal loads.
Increased tool life.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
Observe the recommended rotational speeds.
To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Materials that can be worked: Aluminium; Brass; Bronze; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hard aluminium alloys; Hard non-ferrous metal; Plastics; Soft aluminium alloys; Soft non-ferrous metal; Thermoplastics; Tough aluminium alloys; Zinc

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Automated centres; Drive spindle; Flexible shaft drive; Straight grinder; Tool machine

Downloads

brochure-tc-burrs-alu-cut-2020-web-en.pdf

Tungsten carbide burrs for high performance, ALU HC-NFE, cylindrical shape with radius end WRC

TC high-performance burr ALU cylindrical with radius end WRC dia. 06x16 mm shank dia. 6 mm HICOAT coated for aluminium/non-ferrous metals

WRC 0616/6 ALU HC-NFE

PFERD TOOLS Newsletter subscription