Tungsten carbide burrs for high performance, ALLROUND HC-FEP, tree shape with radius end RBF

Tungsten carbide high-performance burr ALLROUND tree shape with radius end RBF dia. 06x18 mm shank dia. 6 mm HICOAT coated for steel

RBF 0618/6 ALLROUND HC-FEP

Item number:: 21001083
EAN:: 4007220771242

New

Tungsten carbide high-performance burr ALLROUND tree shape with radius end RBF dia. 06x18 mm shank dia. 6 mm HICOAT coated for steel 1

Technical data

Distributor Search

Technical information

Tungsten carbide high-performance burr ALLROUND tree shape with radius end RBF dia. 06x18 mm shank dia. 6 mm HICOAT coated for steel

Cut: ALLROUND HC-FEP
Dia. external: 6 mm
Dia. shank: 6 mm
Length, cut: 18 mm
Length, total: 55 mm
RPM, grey cast iron, white cast iron: 24000 - 58000 RPM
RPM, hard non-ferrous metals: 13000 - 40000 RPM
RPM, hardened, heat-treated steels over 1,200 N/mm²: 13000 - 32000 RPM
RPM, rust and acid-resistant steels: 24000 - 40000 RPM
RPM, soft non-ferrous metals: 24000 - 48000 RPM
RPM, steels up to 1,200 N/mm²: 24000 - 48000 RPM
Radius corner design: 1.5 mm
Packaging unit: 1 piece

Description

High-performance cut ALLROUND with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.

Tree-shaped burr with radius end according to DIN 8032.

Special features

Significantly better stock removal rate than burrs with a conventional cross cut.
Saves time and money thanks to its very high stock removal rate on key materials.
Comfortable working with reduced vibration and less noise.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
Observe the recommended rotational speeds.
If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Safety notes

The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Copper; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; Soft non-ferrous metal; Stainless steel (INOX); Steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW); Zinc

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Automated centres; Drive spindle; Flexible shaft drive; Straight grinder; Tool machine

Downloads

brochure-tc-burrs-allround-cut-2022-web-en.pdf

brochure-tc-burrs-cut-allround-2023-promo-web-en.pdf

Tungsten carbide burrs for high performance, ALLROUND HC-FEP, tree shape with radius end RBF

Tungsten carbide high-performance burr ALLROUND tree shape with radius end RBF dia. 06x18 mm shank dia. 6 mm HICOAT coated for steel

RBF 0618/6 ALLROUND HC-FEP

PFERD TOOLS Newsletter subscription