Mounted points - Series B TOUGH

TOUGH mounted point shape B 97 dia. 3x10 mm shank dia. 3.1 mm CO80 for materials that are difficult to machine

Item number:: 35157281
EAN:: 4007220847190

TOUGH mounted point shape B 97 dia. 3x10 mm shank dia. 3.1 mm CO80 for materials that are difficult to machine Youtube

Technical data

Distributor Search

Technical information

TOUGH mounted point shape B 97 dia. 3x10 mm shank dia. 3.1 mm CO80 for materials that are difficult to machine

Dia. external: 3 mm
Dia. shank: 3.17 mm
Grit size: 80
Length, shank: 32 mm
Shape: B 97
Width: 10 mm
Packaging unit: 10 pieces

Description

The TOUGH type is specifically designed for use on titanium materials, nickel-based and cobalt-based alloys, hardened steel components and built-up weld deposits.

Its applications include weld dressing on repair welds and reworking on turbine blades during aircraft maintenance, as well as regrinding of repair welds in tool and mould-making.

Series B mounted points are generally used on smaller or more delicate components, such as in tool and mould construction. Due to the special shapes of series B mounted points, it is possible to grind in a variety of contours.

The applications range from grinding out slits and grooves in hard-to-reach areas to machining bores and small holes as well as smoothing.

Advantages

Cool grinding as the grain mix is easy to break down.
High stock removal rates and very good tool life.
Constant stock removal rates thanks to the self-sharpening qualities of the ceramic oxide grain.

Recommendations for use

TOUGH mounted points perform best at a cutting speed of 30 to 50 m/s.

Safety notes

The maximum permitted rotational speed relates to the unsupported shank length of 10 mm.

Materials that can be worked: Cobalt-based alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Titanium; Titanium alloys

Applications: Deburring; Finishing; Grinding out; Grouting; Leveling; Surface work; Working on edges (chamfering, rounding); Work on weld seams

Drive types: Flexible shaft drive; Straight grinder

PFERDVALUE

Downloads

Mounted points - Series B TOUGH

TOUGH mounted point shape B 97 dia. 3x10 mm shank dia. 3.1 mm CO80 for materials that are difficult to machine

PFERD Newsletter subscription