Milling tools with ALUMASTER cutting inserts, HSD-R 50 design for radial applications

High-performance milling disc ALUMASTER dia. 49 mm for angle/straight grinders work on aluminium

Item number:: 22000025
EAN:: 4007220156858

High-performance milling disc ALUMASTER dia. 49 mm for angle/straight grinders work on aluminium 2

High-performance milling disc ALUMASTER dia. 49 mm for angle/straight grinders work on aluminium 3

High-performance milling disc ALUMASTER dia. 49 mm for angle/straight grinders work on aluminium Youtube

Technical data

Distributor Search

Matching accessories & spare parts

ALUMASTER cutting insert set WSP-A-8R 50 ALUMASTER

ALUMASTER cutting insert set WSP-A-8R 50 ALUMASTER HICOAT

Service set ALUMASTER ASS-R8 50 ALUMASTER

Torque spanner for ALUMASTER DSWK WIHA Torque 4,0

Cutting inserts bolt set WSP-S-M4S

Arbor for ALUMASTER High Speed Disc BO 8/10 HSD-R 50

Technical information

High-performance milling disc ALUMASTER dia. 49 mm for angle/straight grinders work on aluminium

Dia. external: 49 mm
Dia. hole: 10 mm
RPM to, soft non-ferrous metals: 25000 RPM
Width: 8 mm
Packaging unit: 1 piece

Description

The innovative High Speed Disc ALUMASTER is a unique tool with an extremely high stock removal rate. It is ideal for processing aluminium as it does not generate hazardous or explosive dust. The tool consists of specially developed tungsten carbide cutting inserts, which are fixed to the High Speed Disc.

Special tool for processing aluminium alloys. Alongside angle grinders (mount dia. 10 mm), can also be used on straight grinders and flexible shafts by means of specially developed arbor. Very well-suited to processing hard-to-reach places and delicate components. A guard is not needed due to the tool diameter of 49 mm. HSD-R version for radial applications.

Advantages

Does not generate hazardous or explosive dust.
An extraction system is not required.
Cost-effective and eco-friendly alternative to grinding wheels and flap discs of comparable weight.
Innovative, robust cut geometry for maximum safety, extreme durability and ease of work.
Specially developed, turnable and replaceable tungsten carbide cutting inserts.
Exceptionally high stock removal rate.

Recommendations for use

The tool has primarily been designed for use on aluminium, wrought aluminium alloys and cast aluminium. Non-ferrous metals with a relatively low strength and fibre-reinforced plastics can also be machined. This must be checked for the specific application on a case-by-case basis.
Do not push the tool deep into the workpiece. The milling disc is not a cutting tool.
Do not exert unnecessarily high forces on the tool: The ALUMASTER High Speed Disc already works with low forces.
When machining workpiece edges, cut along the edge, never across the edge.
Do not decelerate the tool on the workpiece. The cutting inserts may break.

Safety notes

It is essential to tighten the flange nut using the appropriate tool, such as a face pin wrench. Clamping systems which are designed to be tightened without the use of an additional tool, i.e. which are tightened by hand, are not permissible.
Tighten the mounting bolts of the cutting inserts using the Torx key provided. If used properly, it is designed to provide a tightening torque of around 4 Nm. Alternatively, use a torque spanner with a tightening torque of 4 Nm.
Loose cutting inserts may break during use. Therefore, check regularly whether they are attached securely.
Do not use damaged cutting inserts! They may break!

Contents

High Speed Disc ALUMASTER HSD-R 50 incl. pre-mounted tungsten carbide cutting inserts, TORX wrench and plastic box.

Materials that can be worked: Aluminium; Brass; Copper; Soft aluminium alloys; Tough aluminium alloys; Zinc

Applications: Milling; Milling out; Root seam processing; Surface work; Work on fillet welds; Work on weld seams

Drive types: Angle grinder; Cordless angle grinder; Robot; Stationary machines

PFERDVALUE

PFERDEFFICIENCY

recommends the ALUMASTER High Speed Discs for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible

PFERDERGONOMICS

recommends the ALUMASTER High Speed Discs as an innovative tool solution for processing aluminium as they do not generate hazardous or explosive dust.

Downloads

Milling tools with ALUMASTER cutting inserts, HSD-R 50 design for radial applications

High-performance milling disc ALUMASTER dia. 49 mm for angle/straight grinders work on aluminium

Matching accessories & spare parts

PFERDEFFICIENCY

PFERDERGONOMICS

PFERD Newsletter subscription