PFERD offices & warehouses are closed from Friday 20th of December 2024 and return on Monday 6th of January 2025.
Legal notice Data protection

HSS hole saw set for electricians (German standard sizes)

HSS bimetal HOLE SAW SET Co5 / M42 for electricians 14-PIECE

Item number:
25900020
EAN:
4007220819852
HSS bimetal HOLE SAW SET Co5 / M42 for electricians 14-PIECE 1
HSS bimetal HOLE SAW SET Co5 / M42 for electricians 14-PIECE 1
Technical data
Login / Register
Distributor Search
Technical information
HSS bimetal HOLE SAW SET Co5 / M42 for electricians 14-PIECE
Height
80 mm
Length
310 mm
PFERD type
LS-SO 13E-2 20-64
Width
260 mm
Packaging unit
1 piece
Description

The set contains nine HSS hole saws in the most common diameters, including accessories, for electricians. It is supplied in a well-arranged plastic box which protects against dirt and damage. Operating instructions are included. It is possible to use hole saw LS 32 with the LSA adapter and washer.
Advantages
  • Cost-effective sawing of round cut-outs.
  • Chattering during sawing is prevented by the alternating tooth pitch.
  • High concentricity.
  • Good chip removal.
  • The hole saw is conveniently centred and guided via the replaceable HSS pilot drill.
  • Hole saw arbor is supplied with an ejection spring for improved ejection of the sawn material.
Recommendations for use
  • Observe the recommended rotational speeds.
  • Clamp the pilot drill in the hole saw arbor and make sure that it projects at least 3 mm (1/8") over the teeth of the hole saw.
  • When cutting metals, use a high-quality cutting oil, if possible. This facilitates smooth running and extends the hole saw service life. Exception: when working on aluminium, use kerosene instead of cutting oil.
  • HSS hole saws are suitable for work on stainless steel (INOX). In order to avoid corrosion, remove any particles which develop during work from the workpiece. Clean the workpiece chemically or mechanically (etching/polishing, etc.).
  • Make sure that all the teeth are applied evenly. To prevent tooth breakage, avoid swinging movements during sawing.
  • Avoid overheating the tool.
Safety notes
  • When using shank extensions, the recommended hole saw rotational speeds must not be exceeded. Risk of accidents!
Contents
  • The Allen key, 4 mm and the ejection spring are only available in a set and not individually.
Materials that can be worked
Aluminium
Hard non-ferrous metal
Plastics
Stainless steel (INOX)
Steel, cast steel
Applications
Cutting out holes
Drilling
Drive types
Column drill
Power drill
Downloads
See more
Scroll to top

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.