Cup brush, crimped, universal, for straight grinders, shank-mounted

POS cup brush crimped TBU dia. 50 mm shank dia. 6.35 mm steel wire dia. 0.30 universal

Item number:: 43740003
EAN:: 4007220398067

POS cup brush crimped TBU dia. 50 mm shank dia. 6.35 mm steel wire dia. 0.30 universal 2

POS cup brush crimped TBU dia. 50 mm shank dia. 6.35 mm steel wire dia. 0.30 universal 3

Technical data

Distributor Search

Technical information

POS cup brush crimped TBU dia. 50 mm shank dia. 6.35 mm steel wire dia. 0.30 universal

Dia. external: 50 mm
Dia. filament material: 0.3 mm
Dia. shank: 6.35 mm
Filament material: Steel wire (ST)
Length, filament: 19 mm
Max. RPM: 13000 RPM
Mounting system: Shank
Packaging: POS packaging
RPM, optimum, from: 6500 RPM
RPM, optimum, to: 13000 RPM
Packaging unit: 1 piece

Description

Generally suitable for cleaning, derusting and smoothing, as well as removal of corrosion and paint. Particularly suitable for brushing on large, flat and easily accessible surfaces due to face-down use with the entire brush face applied to the workpiece.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Advantages

Highly flexible, enabling optimal adjustment to the workpiece contour.
Optimum presentation on the PFERDTOOL-CENTER using hanging hole and labelling with EAN number, designation and filament material.
Long tool life through use of PFERD special wire.
Creates fine surfaces.

Recommendations for use

Please observe the recommended rotational speeds.
For the best results, use a tool drive with a minimum output of 300 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Materials that can be worked: Cast iron; Cast steel; Elastomers; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Thermosetting plastics; Wood

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing oxide layers; Roughening

Drive types: Flexible shaft drive; Power drill; Straight grinder

Downloads

Cup brush, crimped, universal, for straight grinders, shank-mounted

POS cup brush crimped TBU dia. 50 mm shank dia. 6.35 mm steel wire dia. 0.30 universal

PFERD Newsletter subscription