COMBIDISC felt discs CD/CDR

POS COMBIDISC felt discs CDR-FR dia. 75 mm for pre-polishing and high-gloss polishing

Item number:: 47200098
EAN:: 4007220417409

POS COMBIDISC felt discs CDR-FR dia. 75 mm for pre-polishing and high-gloss polishing Youtube

Technical data Change variant

Distributor Search

Choose options

Clamping system

CDR system

Dia. external

50 mm 75 mm

Packaging unit

1 10

Reset Filter

Technical information

POS COMBIDISC felt discs CDR-FR dia. 75 mm for pre-polishing and high-gloss polishing

Clamping system: CDR system
Dia. external: 75 mm
RPM, optimum, from: 1200 RPM
RPM, optimum, to: 2500 RPM
Packaging unit: 1 piece

Description

Suitable for polishing with polishing paste bars, grinding pastes or diamond polishing pastes in face-down grinding on small and medium-sized surfaces.

The CDR clamping system has a threaded connection with male thread (plastic) on the tool side. Also suitable for the following commonly used systems: Roloc™, Lockit, Speed Lok TR, Power Lock Type III, Fastlock-System B, Roll-On.

Advantages

High economic efficiency as tool can be changed quickly.
Very comfortable due to ease of use and low-vibration working.
No disruptions in use due to adhesion, slipping or coming loose.

Recommendations for use

Use COMBIDISC felt discs with an abrasive disc holder on flexible shaft drives with an angle handpiece, or small compressed-air or electric angle grinders.
Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.
When applying a different polishing paste, use a new unused felt disc.
For the best results, use at a recommended cutting speed of 5-10 m/s. This provides an ideal compromise between polishing performance, thermal load on the workpiece and tool wear.

Ordering notes

Please order arbor separately.

Safety notes

The maximum permitted peripheral speed is 50 m/s.

Materials that can be worked: Aluminium; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc

Applications: Polishing

Drive types: Angle grinder; Cordless angle grinder; Drive spindle; Flexible shaft drive; Straight grinder

PFERDVALUE

PFERDEFFICIENCY

recommends COMBIDISC tools to reduce tool changing and setting-up time.

PFERDERGONOMICS

recommends COMBIDISC as an innovative tool solution to sustainably reduce the vibration, noise and dust produced during use and to improve comfort when working.

Downloads

COMBIDISC felt discs CD/CDR

POS COMBIDISC felt discs CDR-FR dia. 75 mm for pre-polishing and high-gloss polishing

PFERDEFFICIENCY

PFERDERGONOMICS

PFERD Newsletter subscription