CC-GRIND ROBUST SG STEELOX ★★★☆

CC-GRIND ROBUST grinding disc 125x22.23 mm Performance Line SG STEELOX for steel/stainless steel

Item number:: 64195125
EAN:: 4007220304433

CC-GRIND ROBUST grinding disc 125x22.23 mm Performance Line SG STEELOX for steel/stainless steel 2

CC-GRIND ROBUST grinding disc 125x22.23 mm Performance Line SG STEELOX for steel/stainless steel 3

CC-GRIND ROBUST grinding disc 125x22.23 mm Performance Line SG STEELOX for steel/stainless steel 4

CC-GRIND ROBUST grinding disc 125x22.23 mm Performance Line SG STEELOX for steel/stainless steel 5

CC-GRIND ROBUST grinding disc 125x22.23 mm Performance Line SG STEELOX for steel/stainless steel 6

CC-GRIND ROBUST grinding disc 125x22.23 mm Performance Line SG STEELOX for steel/stainless steel Youtube

Technical data

Distributor Search

Technical information

CC-GRIND ROBUST grinding disc 125x22.23 mm Performance Line SG STEELOX for steel/stainless steel

Abrasive: Ceramic oxide grain
Dia. external: 125 mm
Dia. hole: 22.23 mm
Max. RPM: 12200 RPM
Mounting system: Centre hole
Shape: CC-GRIND ROBUST
Packaging unit: 10 pieces

Description

The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.

With the CC-GRIND ROBUST, PFERD offers a modern, high-performance and ergonomic alternative to grinding wheels, flap discs and fibre discs.

Grinding disc for steel and stainless steel (INOX) with high grinding performance and maximum tool life.

Advantages

The fastest work progress thanks to highly aggressive abrasive.
Glass-fibre-reinforced plastic backing pad guarantees a robust, reliable application.
Significantly more ergonomic than a grinding wheel: Noise, vibrations and dust are significantly reduced. A considerably superior surface quality is also produced.
In contrast to flap discs, they can achieve flat surfaces thanks to their dimensional stability.
In contrast to fibre discs, CC-GRIND ROBUST does not deform, even under extreme climatic conditions, and is considerably more robust in heavy-duty use.
Thanks to the adapted geometry, the use of a special clamping flange set is not necessary.
Trimming the tool can be carried out without any problems.

Recommendations for use

Trim the CC-GRIND ROBUST on sharp metal edges, files or with cutting inserts.
Trimming should only be carried out from a contact angle of 45°.
Apply the tool carefully and increase the pressure until a chip is formed. Maintain the pressure until the workpiece has been processed to the required dimensions.
For optimum results, use with a flat contact angle.
Only use the face of the disc, not suitable for peripheral grinding.
Choose the CC-GRIND ROBUST SG STEELOX for deburring.