Bevel brushes crimped shank-mounted

Bevel brush crimped KBU dia. 95x10 mm shank dia. 6 mm steel wire dia. 0.30

Item number:: 43312501
EAN:: 4007220899397

Technical data Change variant

Distributor Search

Choose options

Dia. external

95 mm

Dia. filament material

0.3 mm

Filament material

Stainless steel wire (INOX) Steel wire (ST)

Reset Filter

Technical information

Bevel brush crimped KBU dia. 95x10 mm shank dia. 6 mm steel wire dia. 0.30

Dia. external: 95 mm
Dia. filament material: 0.3 mm
Dia. shank: 6 mm
Filament material: Steel wire (ST)
Length, filament: 25 mm
Length, total: 2-7/16
Length, total: 62 mm
Max. RPM: 12000 RPM
Mounting system: Shank
Packaging: Industrial packaging
RPM, optimum, from: 6000 RPM
RPM, optimum, to: 9000 RPM
Width: 10 mm
Packaging unit: 10 pieces

Description

Excellent for medium-duty brushing such as deburring, cleaning and derusting.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Steel wire withstands temperatures up to 300 Â°C.

Advantages

Optimal access to hard-to-reach areas such as inner edges, grooves and keyways.
Highly flexible, enabling optimal adjustment to the workpiece contour.
Long tool life through use of PFERD special wire.
Creates fine surfaces.

Recommendations for use

Please observe the recommended rotational speeds.
For the best results, use a tool drive with a minimum output of 300 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Materials that can be worked: Cast iron; Cast steel; Elastomers; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Thermosetting plastics; Wood

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing oxide layers; Roughening

Drive types: Flexible shaft drive; Power drill; Straight grinder

Downloads

Bevel brushes crimped shank-mounted

Bevel brush crimped KBU dia. 95x10 mm shank dia. 6 mm steel wire dia. 0.30

PFERD Newsletter subscription